Tilts where you need it
The head swivels on its bracket, so you aim the beam at the mirror — or at a picture — instead of into your eyes.
A bar, not a bulb
An even strip of frosted light across the whole width. No hot spot, no shadow under the chin, no fitting to unscrew.
Two sizes, two finishes
40 cm or 50 cm, in matte black or matte white anodised aluminium with a fine ribbed top edge.
Warm or cool, your call
Warm white 3000K for a soft, flattering glow — or cool white 6000K when you need to see colour truly.
Thin enough to disappear, sharp enough to notice
A narrow aluminium bar with a finely ribbed top edge, carried on a small wedge-shaped bracket that keeps it close to the wall. In matte black it draws a hard graphic line above the mirror; in matte white it reads as part of the wall until it is switched on. Either way it stays out of the way of a mirror cabinet door.
The one light in the bathroom you actually look into.
Ceiling spots put your face in shadow. A bar above the mirror lights it head-on — which is why every hotel bathroom has one.
Turn it around and it becomes a picture light
The same bar, tilted the other way, washes an even band of light down a framed print, a shelf or a headboard. One fixture that works over a washbasin, in a hallway, above a chest of drawers or beside a bed — and it only needs a standard wall outlet box behind it.
Warm to relax in, cool to get ready in
Same fixture, same wall — warm white 3000K on the left, cool white 6000K on the right.
Warm White 3000K
Soft and golden, close to a filament bulb. Flattering in the evening, and the right choice if the lamp is going over a picture or a bed.
Cool White 6000K
Crisp and neutral, so colours read true. The one to pick for shaving, make-up and getting ready in the morning.
Pick the length that suits your mirror
As a rule of thumb, take a bar around two thirds the width of your mirror. Both versions sit about 12 cm off the wall on the bracket, so they clear a mirror cabinet without fouling the door.
Works on US and EU mains
The IC constant-current driver is rated 100–240 V with isolation, so the same fixture runs on US 110–120 V and European 220–240 V without an adapter or a separate version.
Down to the millimetre
| Design | Slim rectangular LED bar with ribbed top edge on a tilting wedge bracket |
|---|---|
| Finish | Matte Black or Matte White anodised aluminium — choose above |
| Length | 40 cm / 15.7" or 50 cm / 19.7" — choose above |
| Power | 9 W (40 cm) · 12 W (50 cm) |
| Light source | Integrated 2835 LED with frosted diffuser — no bulb required |
| Light colour | Warm White 3000K (2800–3200K) or Cool White 6000K (5800–6200K) — choose above |
| Driver | IC constant-current, isolated, wide voltage |
| Voltage | 100–240 V — US and EU mains |
| Adjustment | Tilting head on the wall bracket |
| Mounting | Surface-mounted to a standard wall outlet box |
| Weight | 0.65 kg (40 cm) · 0.88 kg (50 cm) |
| Suitable for | Bathroom mirror, vanity, framed picture, hallway, bedside wall, dressing area |
| Included | 1 × mirror light incl. bracket and fixings |
What makes it work
- Tilting head aims the light at the mirror, not at your eyes
- Even frosted strip instead of a single glaring point
- Two lengths so it can be matched to the mirror width
- Matte black or matte white, both fully anodised
- Integrated LED, nothing to replace
- One wide-voltage version for US and EU mains
- Works equally well as a picture light
Bring a clean line of light above your mirror with this Slim LED Mirror Light. A narrow anodised aluminium bar with a finely ribbed top edge and a frosted diffuser sits on a small wedge-shaped wall bracket, and the head tilts so the light lands on the mirror instead of in your eyes — no glare, no hot spot, just an even wash across your face. Choose 40 cm / 15.7 in at 9 W or 50 cm / 19.7 in at 12 W, in matte black or matte white, with fixed warm white 3000K for a soft, flattering glow or cool white 6000K for crisp, true-to-colour light when you shave or do your make-up. The IC constant-current driver runs on 100–240 V, covering US 110–120 V and European 220–240 V mains alike, and the same slim bar works just as well turned into a picture light — made for bathroom mirrors, vanities, framed prints, hallways and bedside walls.
Good to know
Which length should I choose?
Around two thirds of your mirror width works best. The 40 cm version suits mirrors of roughly 50–70 cm, the 50 cm version mirrors of roughly 70–90 cm.
Warm white or cool white?
Cool White 6000K if the mirror is where you shave or do your make-up — colours read true. Warm White 3000K if you want a softer, cosier light, or if you are using it as a picture light.
Can I switch between the two light colours?
No, the light colour is fixed per version, so choose it before ordering. There is no colour-changing option on this model.
Will it work on my mains voltage?
Yes. The driver is rated 100–240 V, which covers US 110–120 V as well as European and UK 220–240 V. There is only one version and no adapter is needed.
Can I use it over a picture instead of a mirror?
Yes. The head tilts, so you can angle the beam down onto artwork, a shelf or a headboard. It is a mirror light and a picture light in the same fixture.
How is it wired?
It mounts to a standard wall outlet box behind the bracket and is hard-wired — it is not a plug-in lamp. If there is no outlet above your mirror, an electrician can add one in minutes.
Do I ever have to replace a bulb?
No. The LED strip is integrated and rated for many thousands of hours, so there is no socket and no bulb to swap.
How long does delivery take?
Free shipping on every order. We process within 24–72 hours; delivery takes 8–18 business days with tracking included.